2.2 Configuration with a Siemens master
PLEASE NOTE
Various configuration programs are available in con-
junction with a Siemens master.
Observe the appropriate procedures for your configu-
ration program.
2.2.1 COM PROFIBUS
Preparations
1. Copy the GSD of the valve terminals into the direc-
tory \COMPB3x\GSD of your PC/programmer. You
will find the GSD on the accompanying CD ROM.
File VI10F13C.GSE.
CD ROM
Further information (directories etc.) can be found in
the file "readme" in the main directory of the CD
ROM.
PLEASE NOTE
Update the slave catalogue when you copy the GSD
whilst working with COM PROFIBUS.
Menu: "File" - "Load GSD file"
2. Commissioning
CP FB13-E 9904b 2-13
To Next Page
Loading...