Fimap MXR - Page 42

Operator Menu
To enter to the Operator Menu go ahead
as follow:
• With the machine off, press at the
same time button 2, 3 and 4.
• Turn on the key, with the three but-
tons pressed.
• Waiting the upload of the Working
Menu.
• Release the buttons.
To move inside of the Operator Menu,
press button 3 and 4.
To modify a parameter or confirm a
changed value within a specific section,
press the button 2.
Change a Parameter (in the Operator
Menu)
To change the value of a parameter pro-
ceed as follows:
• Run the menu with the button 3 or 4
and select the parameter to change.
• Select the parameter to be changed
pressing the button 2
• Utilize the button 3 and 4, to shift all
the available values to edit the pa-
rameter.
• To confirm the new value press the
button 2.
• To save the change is necessary to
return to the User Menu; to exit from
Working Menu select the Exit pa-
rameter and confirm by pressing the
button 2.
For example, to modify the language
from EN to IT
• Turn OFF the machine.
• With the machine off, press at the
same time button 2, 3 and 4.
• Until the buttons are pressed, turn
ON the key and wait the upload of
the Working Menu.
• Use the buttons 3 and 4 to select the
Language parameter.
• To modify the values of this param-
eter, press the button 2. To confirm
the possibility to change parameters,
the first line on the display will blink.
• Utilize the buttons 3 and 4 to shift
all the values of this parameter and
select the value IT.
• Confirm the new value by pressing
the button 2.
• To save this modification, select
the Exit parameter and confirm by
pressing button 2.
42