Fire-Lite MS-9600 - Page 13

Features and Options Product Description
MS-9600 PN 51335:E 7/9/03 13
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
• Annunciators:
 ACM Series-LED Zone Annunciators
 LDM Graphic Annunciator Series
 LCD-80F Liquid Crystal Display point annunciator
 ACM-8RF Relay Module
• Silence inhibit timer option per NAC
• Autosilence timer option per NAC
• Continuous, March Time, Temporal or California code for main circuit board
NACs with two-stage capability
• Selectable strobe synchronization per NAC
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules,
AFM annunciators or LCD-80F Remote annunciator
• Auto-program (learn mode) reduces installation time. Reports two devices set to
the same address
• Password and key-protected nonvolatile memory
• User programmable password
• Fully programmable from local keypad or keyboard or local PC
• SLC operates up to 10,000 ft. (3,000 m) with twisted, shielded wire or 3,000 ft
(900 m) with untwisted, unshielded wire
• Compatible with Fire•Lite newer series devices (CLIP Mode)
 CP350 and CP355: addressable Ionization Smoke Detector
 SD350(T) and SD355(T): addressable Photo Smoke Detector (T= with
Thermal Sensor)
 H350(R) and H350(R): Fast Response Heat Detector (R=Rate-of-Rise option)
 D350P(R): addressable Photo Duct Detector (R=alarm relay option)
 B501BH & B501BHT Sounder Base
 B224RB Relay Base
 B224BI Isolator Base
 MMF-300: Monitor Module
 MMF-300-10: Monitor Module (10 Input Class B or 5 Input Class A)
 MDF-300: Dual Monitor Module (uses two consecutive SLC addresses)
 MMF-301: Miniature Monitor Module
 MMF-302: 2-wire Detector Module
 MMF-302-6: 2-wire Detector Module (6 Input Class B or 3 Input Class A)
 CMF-300: Control Module
 CMF-300-6: Control Module (6 Output Class B or 3 Output Class A)
 CRF-300: Relay Module
 CRF-300-6: Relay Module (6 Form-C relays)
 BG-12LX: Manual Pull Station
 I300: Isolator Module
• Compatible with legacy Fire•Lite 300 Series devices (CLIP Mode only):
 CP300: addressable Ionization Smoke Detector
 SD300(T): addressable Photoelectric Smoke Detector (T= Thermal Sensor)
 C304: Control Module
 M300: Monitor Module
 M301: Miniature Monitor Module
 M302: 2-wire Detector Module
 BG-10LX: Manual Pull Station
• Optional 4XTMF module (conventional reverse polarity/city box transmitter)
• Optional DACT-UD Digital Alarm Communicator Transmitter, reports up to 99
zones or 636 points (all devices) to a UL listed Central Station