Programming Master Programming Level
82 MS-9600 PN 51335:E 7/9/03
3.6.5.1 Trouble Reminder
The Trouble Reminder features causes the control panel piezo to sound a reminder
‘beep’ for alarms and troubles, after the panel has been silenced. Refer to "System
Setup" on page 81, for a detailed description of this feature. Pressing 1 while
viewing System Setup Screen #1 will cause the display to toggle to Trouble Rem
On, which enables this feature. Each press of the 1 key will cause the display to
toggle between Trouble Rem On and Trouble Rem Off.
3.6.5.2 Banner
The top line of the display, which appears when the control panel is in normal mode,
can be changed by using the Banner option. Pressing 2 while viewing System Setup
Screen #1 will cause the following to be displayed:
Pressing 1 while viewing the Banner Screen will select the factory default banner
setting and display the following screen:
Pressing the Enter key will store this selection in nonvolatile memory and return the
display to the Banner Screen.
Pressing 2 while viewing the Banner Screen will display the following screens :
See Page
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
FACTORY BANNER
FIRE LITE ALARMS INC
Factory Banner Screen
USER DEFINED BANNER
PRESS ENTER IF OK
User Defined Banner Screen #1
USER BANNER - LINE 2
PRESS ENTER IF OK
************
User Defined Banner Screen #2
To Next Page
Loading...
Need help?
General
