To Next Page

To Previous Page

Programming Master Programming Level

50 MS-9600 PN 51335:E 7/9/03

When the last digit is keyed-in, the following screen will be displayed:

The programmer can continue adding detectors by pressing the ESC or left arrow

key which will return the display to the Add Detector Screen.

3.6.2.1.2 Delete Detector

Pressing 2 in the Detector Screen will display the Delete Detector Screen which

allows the programmer to delete a specific detector:

A flashing cursor will appear in the position of the first asterisk to the left. The

programmer keys in the three digit detector address, such as 005. When the last

digit is keyed-in, the following screen will be displayed:

The programmer can continue deleting detectors by pressing the ESC or left arrow

key which will return the display to the Delete Detector Screen.

3.6.2.1.3 Edit Detector

The programmer can change a detectors existing or factory default programming by

pressing 3 in the Detector Screen. The following screen will be displayed:

A flashing cursor will appear in the position of the first asterisk to the left. The

programmer keys in the three digit detector address, such as 017.

ADD DETECTOR

DETECTOR# 005

IS ADDED

DETECTOR

1=ADD

2=DELETE

3=EDIT

Detector Screen

DELETE DETECTOR

ENTER DETECTOR#

***

Delete Detector Screen

DELETE DETECTOR

DETECTOR# 005

IS DELETED

EDIT DETECTOR

ENTER POINT ADDRESS

***

Edit Detector Screen

Fire-Lite MS-9600 User Manual

Other manuals for Fire-Lite MS-9600