EasyGrid User Guide MAN-00084 R 11.0
1
2 Product Certification
2.1 CE Information
Electronic test equipment is subject to the EMC Directive in the European
Union. The EN61326 standard prescribes both emission and immunity
requirements for laboratory, measurement, and control equipment.
This unit has been tested and found to comply with the limits for a Class A
digital device. Contact FISO for access to the Declaration of Conformity.
2.2 Independent Laboratory Testing
This unit has undergone extensive testing according to the European Union Directive and Standards. All
pre-qualification tests were performed internally, at FISO, while final tests were performed externally, at
an independent, accredited laboratory. This guarantees the unerring objectivity and authoritative
compliance of all test results.
Use of shielded remote I/O cables, with properly grounded shields and metal connectors, is
recommended in order to reduce radio frequency interference that may emanate from these cables.
Shielded I/O cables are recommended to improve protection against lightning surge if unit or cables are
installed in an outdoor area. See certificate and tests of compliance.
EasyGrid has been extensively tested to stringent environmental standards to ensure it remains reliable
when used under published specifications.
Contact FISO for any inquiry related to monitor certification.
To Next Page
Loading...
Need help?
General