Fiso EasyGrid - Log Settings

EasyGrid User Guide MAN-00084 R 11.0
43
6.6 Log Settings
This screen allows the configuration of parameters for the data logging function. The data
logger will record the following information during each set period:
 Live Temperature for each channel
 Maximum Temperature for each channel
 Minimum Temperature for each channel
 Average Temperature for each channel
 Sensor status and Diagnostic values
 Status of each Relay
 Timestamp
The data is saved in the EasyGrid 16MB internal memory at the defined period. Every hour the data is
copied in the external memory card when present in the monitor. If the memory card is removed for an
extended time, the acquired data during the absence of the memory card will be synchronized when the
card will be inserted back.