EasyGrid User Guide MAN-00084 R 11.0
62
8 Nortech Client Software
The Nortech Client software can be used to configure the EasyGrid system and retrieve the data stored
in the internal memory of the unit as well as from the SD memory card. It is possible to communicate
directly through the USB interface of the EasyGrid unit from your office PC.
The main functions are:
Configuring and controlling the EasyGrid unit.
Real-time viewing of all EasyGrid unit’s measurements, statistics and settings.
Retrieving and viewing the logged data from Mega Logger and Event Logger and the SD card.
The minimum system requirements are:
Intel® Pentium® 4 or compatible processor at speed above 1 GHz
Microsoft Windows® XP, Vista or 7
Monitor resolution at 800 × 600
At least 512 MB of RAM and 100 MB of available hard disk space
Media readers and/or drives
A mouse or similar pointing device.
USB interface.
8.1 Getting Started
8.1.1 Installing the Program
To install the software for the first time on the computer:
Place the removable storage device provided with the Nortech Unit on the media readers and/or
drives. If auto run does not start, open Windows Explorer to view the removable storage device’s
content and double-click on setup.exe.
The Install Shield Wizard will automatically start.
Click Next to proceed with the installation.
When the installation is over, click Finish to exit the Wizard.
Accessing the Program
The program should be in the installed program list, under FISO Technologies.
To execute the program, select the program from the program list. The complete access menu is
Start ► All programs ► FISO Technologies ► Nortech Client ► Nortech Client.
To Next Page
Loading...
Need help?
General