FiT FLYER - Handlebar and Stem Adjustments

29
EN
28
Heightofthehandlebars
Once the seat has been rmly and comfortably
positioned, the handlebars must be adjusted to
yourneeds.
Aneffectivestartingpositionforrelaxedridingis
offered by a seating position in which the upper
bodyandarmforma90°angle.
Inordertochangetheheightofthehandlebars,
theheightofthestemmustbeadjusted.
Allow your FLYER specialist retailer to
adjustthesettingsofthehandlebarsand
the stem. This can be done in various
waysdependingonthemodel.
Adjustingthestem
For all stems, please read the instruc-
tions
suppliedbythemanufacturer.Only
allow your FLYER specialist retailer to
workonthehandlebarsandstem.
Changing the position of the stem also
changesthepositionofthehandlebars.
You should always be able to safely
reachandusegripsandcontrols.Han
-
dles with a pronounced wing shape may
need
toberepositioned.
Makesurethatallcablesandleadshave
asufcientlengthtoallowforallpossible
steering movements when changing the
handlebarandstemposition.
SpeedlifterTwist
The Speedlifter allows you to adjust the height
ofthehandlebarsinonlyafewmovements.The
Twist system makes it possible to turn the handle
-
bars 90 degrees to save space while transporting
and
storingyourFLYER.
Open the quick-release lever of the Speedlifter
(1).
Movethehandlebarstothedesiredposition(2).
Closethequick-releaselevercompletelytofasten
thehandlebars(3).
1
2
3