1.Undo
Allows users to undo the recent edits by the following two methods:
Method 1：
Method 2：
Click [Edit]-[Undo].
Press the shortcut key Ctrl+Z.
2.Redo
Allows users to redo the most recent edit you have undone to your model file by the
following two methods
Method 1：
Method 2：
Click [Edit]-[Redo].
Press the shortcut key Ctrl+Y.
4.Select All
By the following two methods, you could select all models in the scene. (When models are
too small to be seen or out of viewing scope, please click [Center] and [Scale] buttons to
adjust the model.)
Method 1：
Method 2：
Note: choose the functions of on the center or scale to get the best model position view.
Click [Edit]-[Select All].
Press the shortcut Ctrl+A.
5.Duplicate
Select the object and duplicate the object through the following two methods:
Method 1：
Method 2：
Click [Edit]-[Duplicate].
Press the shortcut key Ctrl+V.
6.Delete
Select the object and delete the object through the following two methods:
Method 1：
Method 2：
Click [Edit]-[Delete].
Press the shortcut key Delete.
3.Empty Undo-stack
To clean up the recorded operating steps so as to release the memory.
7.Auto Layout All
Click [Edit]-[Auto Layout All] after loading one or more than one models, all models will
be placed automatically as automatic placement rule.
8.Repair Models
Repair the wrong files.
9.Supports
Learn more on chapter
3.2.10.
42
To Next Page
Loading...
