Update Firmware
Open the FlashPrint (Now your computer and Creator Pro 2 are connecting with each
other by USB cable). click [Tools] and [Update Firmware], then click [OK] and a dialog box
will pop up. Click [Yes] to start firmware update.
1.First Run Wizard
It introduce the basic functions briefly.
2.Help Contents.
Click [Help]-[Help Contents], you can read the help contents.
3.Check for Updates
Click [Help]-[Check for Updates] to detect the available updates online.
4.About FlashPrint
Click [Help]-[About FlashPrint], the software information box will pop up. The contents
include the current software version and copyright information.
Machine Type：
Select Firmware：
Select Serial：
Update Firmware
Sailfish Firmware 7.8 for FlashForge Creator Pro 2
FlashForge Creator Pro 2
ff_creatorx-2560_v7.8.0-Pro2-20200320
COM1
Rescan
OK Cancel
43
To Next Page
Loading...
