FLASHFORGE 3D PRINTER CREATOR PRO 2 - Filament; Level; Tools Interface

Tools Interface
Tools interface included filament, level, Home, Manual, Setting, Status and About.
[Filament]
Filament load and unload setting.
[Level]
Adjust platform flatness by manual leveling.
Print Preheat Tools
L Extruder
Load
Unload
Load
Unload
R Extruder
Heating...
L Extruder 75℃ / 220℃
Please wait, device is homing.
Next
24
Filament
Setting
Level
Status
Home
About
Manual
Filament
Setting
Level
Status
Home
About
Manual