Not necessarily. Adding a raft results in more filament extrusion and higher
print success rate. With a heated build plate, it enhances the adhesion
between the model and the platform, which makes the model adhere to the
platform well during printing, and also increases the print success rate.
Q8: Is it necessary to add a raft when printing models?
The USB flash drive format is incorrect. The printer supports the FAT32 file
system. Please format the USB flash drive to FAT32.
Q9: What to do if print files can not be found and the screen
displays only folders after inserting the USB flash drive?
1. Please check if the Wi-Fi name contains special characters. If so, modify it
and try again.
2. Please check if the password contains special characters. If so, modify it
and try again.
Q10: What to do with the Wi-Fi connection failure?
Do not power off the printer or disconnect from the network during firmware
download or update to prevent update failures.
Q11: Firmware update precaution.
If the startup sound can be heard, please replace the screen or cable. If not,
please contact our after-sales personnel.
Q12: Why is the boot screen white?
The battery needs to be purchased by yourself.
Model: LR44, 1.5V
Size: 11.6*5.1mm
Compatible model: AG13/A76/L1154
Q13: Is the battery used for the hygrometer in the filament chamber
supplied? What is the battery model?
37
To Next Page
Loading...
