1.2 Unboxing
1. Open the top carton cover, and remove
the top foam containing the power cord,
user guide, USB flash drive, and after-
sales service card. Take out the whole
outer box from bottom to top and then
move the machine off the wooden base.
2. Open the front door. First remove (just
pull out) the two pieces of rectangular
foam below the platform.
3. Then, remove the remaining foam
below the platform, with two layers
in total. The upper layer contains the
tool kit. The lower layer contains the
supplied filament,heat resistant
gloves, and desiccant (for details,
please refer to the packing list).
4. Cut the zip ties securing the
extruder and guide rails with
diagonal pliers. Ensure the
extruder can move freely
after ties are removed.
Rectangular foam Rectangular
foam
06
To Next Page
Loading...
