Please operate the equipment in a well-ventilated environment.
Do not use the equipment for illegal activities.
Do not use the equipment to make food storage containers.
Do not place printed models into your mouth.
EQUIPMENT ENVIRONMENT REQUIREMENTS
EQUIPMENT PLACEMENT REQUIREMENTS
COMPATIBLE FILAMENT REQUIREMENTS
FILAMENT STORAGE REQUIREMENTS
LEGAL STATEMENT
The equipment must be placed in a dry and well-ventilated environment.
A distance of at least 60cm must be reserved around the front, back, left and right
sides of the equipment. Recommended storage temperature: 0-40℃
When using this equipment, it's recommended to use Flashforge's filaments.
If non-Flashforge filaments are used, there will be certain differences in material
properties, and print parameters may need adjustments.
Room temperature: 15-30℃; Humidity: 20%-70%
Please store filaments in a dry and dust-free environment after unpacking. It is
recommended to use the matching filament dry box for storage.
Users are not authorized to make any modifications to this User Guide.
Flashforge shall not be held responsible for any safety incidents resulting from the
disassembly or modification of the equipment by the customer. No one is allowed to
modify or translate this Guide without Flashforge's permission. This Guide is protected
by copyright, and Flashforge reserves the right of the final interpretation of this Guide.
First Edition (April 2023)
Copyright © 2023 Zhejiang Flashforge 3D Technology Co., Ltd. All Rights Reserved.
03
To Next Page
Loading...
