Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
9. Accessories
9.1 Reversing/monitoring camera
A reversing camera is recommended to improve
visibility when reversing.
The monitoring camera allows you to observe the
loading and unloading process and can also be
connected to the reversing camera.
(No separate monitor needed.)
Fig. 59: Reversing camera
9.2 Fliegl Tracker
The beacon-based Fliegl Tracker vehicle detection
system allows data to be transmitted between the
harvesting and loading vehicles, for example.
One system to benefit from this procedure is the
Fliegl Weighing System (FWS).
The operating instructions are supplied separately
(see section 10).
Fig. 60: Beacon (different model shown)
9.3 Fliegl Weighing System (FWS) ISOBUS
Weighing sensors and weighing system
components must be fitted to the ASW.
You also require an ISOBUS display and/or
ISOBUS control system in your towing vehicle.
You configure the operation in your ISOBUS
control system.
The operating instructions are supplied separately
(see section 10).
9.4 Bluetooth thermal printer for FWS
All saved data can be printed on-site via the
Bluetooth printer.
The operating instructions are supplied separately
(see section 10).
To Next Page
Loading...