Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
All rotating parts must be adequately covered.
The safety devices on the tractor and working attachment form an
integral system with the drive shaft guard.
Before every start-up, ensure that all safety devices on the drive
shaft, tractor and work machine are installed and functional.
Before operating the drive shaft, always replace any damaged or
missing parts with original spare parts, or have them correctly
retrofitted.
Fig. 77: Drive shaft attachment
Before entering the work area and before carrying out maintenance
work, always switch off the engine, remove the ignition key and check
that all rotating machine parts have come to a stop.
Do not enter the work area while parts are still rotating.
For your safety, do not wear loose clothing, belts or other loose
items. There is an increased risk of accidents if these come into
contact with machine parts.
Fig. 79: Risk of entanglement
Do not lean on the drive shaft or use it as a climbing aid.
To Next Page
Loading...
