427-0014-00-10 Revision 210 Copyright © 2008 FLIR Systems, Inc. 11
The SR-100P camera uses an enclosure that is sealed and pressurized for additional outdoor
protection in adverse conditions.
Figure 2-4: SR-100P with Sun Shroud
The SR-100P enclosure is pressurized with dry nitrogen to prevent impurities from
contaminating the camera and lens components. The camera can be pressurized in the field,
and a pressure relief valve prevents overcharging of the enclosure.
2.4 Package Contents
Refer to the Shipping Check List that is shipped with each camera for a description of the parts
and components that are included with the camera. If there is any discrepancy between the list
and the contents of your shipment, please contact FLIR Systems Customer Support
immediately using the contact information at the front of this manual.
To Next Page
Loading...
Need help?
General
