427-0014-00-10 Revision 210 Copyright © 2008 FLIR Systems, Inc. 7
1.0 WARNINGS AND CAUTIONS
Protect Your Investment
The camera should be installed by a trained professional according to local codes and industry-
standard safe practices.
Proper ESD protocol should be followed while working inside the unit.
The camera is a precision optical instrument and should not be exposed to excessive shock or
vibration.
Avoid pointing the system directly at extremely high-intensity radiation sources, such as the sun,
lasers, arc welders, etc. This warning applies whether or not the system is powered.
Great care should be used with your camera’s optics. They are delicate and can be damaged by
improper cleaning. Only clean the lens in the manner described in section 8.0 Caring for your
SR-Series Thermal Camera.
Legal Considerations
Camera and audio surveillance may be prohibited by laws that vary from country to country.
Check the laws in your local region before using this product for surveillance purposes.
Support
If you have questions that are not covered in this manual, or need service, contact FLIR
Customer Support at (805) 964-9797 for additional information prior to returning your SR-Series
Thermal Camera. In the US, you can also reach FLIR Customer Support at (888) 747-FLIR
(747-3547).
Important! All thermal imaging systems are subject to export control. Please contact FLIR
for export compliance information concerning your application or geographic area.
Caution! This guide uses the term Caution! to indicate a potentially hazardous situation,
which, if not avoided, may result in bodily harm or injury, damage to the camera, or other
property damage.
To Next Page
Loading...
Need help?
General
