Flow-tronic IFQ MONITOR - Default Chapter; Table of Contents

To Next Page

To Previous Page

Rue J.H. Cool 19a | B-4840 Welkenraedt | BELGIUM

Tel. : +32 (0)87 899 799 | Fax : +32 (0)87 899 790

E-mail : info@flow-tronic.com | www.flow-tronic.com

- 1 -

CONTENTS

1 SPECIFICATIONS - 3 -

2 GENERAL INFORMATION - 4 -

2.1 SAFETY INFORMATION - 4 -

2.1.1 USE OF HAZARD INFORMATION - 4 -

2.1.2 PRECAUTIONARY LABELS - 4 -

2.1.3 CONFINED SPACE PRECAUTIONS - 5 -

2.2 PRODUCT OVERVIEW - 6 -

2.2.1 SYSTEM FEATURES - 6 -

2.2.2 APPLICATIONS - 6 -

2.3 UNPACK THE INSTRUMENT - 7 -

2.4 FRONT PANEL - 7 -

2.5 PRODUCT IDENTIFICATION - 8 -

3 INSTALLATION - 9 -

3.1 MOUNT THE INSTRUMENT - 9 -

3.2 ELECTRICAL CONNECTIONS - 10 -

3.2.1 ELECTROSTATIC DISCHARGE (ESD) CONSIDERATIONS - 10 -

3.2.2 WIRING OF POWER - 11 -

3.2.2.1 AC POWER - 11 -

3.2.2.2 DC POWER - 12 -

3.2.3 WIRING - 12 -

3.2.3.1 RAVEN-EYE

OR BELUGA

SENSOR CABLE CONNECTIONS - 14 -

3.2.3.2 ULS (OR OTHER LEVEL SENSOR) CABLE CONNECTIONS - 15 -

3.2.3.3 4-20 MA OUTPUT CONNECTIONS - 16 -

3.2.3.4 CONTACT OUTPUT CONNECTIONS - 17 -

3.2.3.5 MODBUS RTU OUTPUT CABLE CONNECTIONS - 18 -

3.2.3.6 MODBUS RTU OUTPUT PARAMETERS - 18 -

3.2.3.7 MEASUREMENT DATA „READ ONLY“ - 19 -

3.3 CONNECT THE POWER SOURCE - 19 -

3.4 RECORD THE INSTALLATION MEASUREMENTS - 19 -

4 OPERATION - 20 -

4.1 CONFIGURATION OF VELOCITY SENSOR - 20 -

1.1.1 CONFIGURATION WITH RTQ-LOG FOR IFQ MONITOR OR PLC - 20 -

4.2 OPEN/REMOVE THE PROTECTIVE COVER - 21 -

4.3 MAIN SCREEN - 22 -

4.3.1 RESULT SCREENS - 23 -

4.3.1.1 “M” INDICATION - 23 -

4.3.2 STATUS LEDS - 23 -

4.3.2.1 LED A (GREEN) - 24 -

4.3.2.2 LED C (YELLOW) - 24 -

4.3.2.3 LED D (RED) - 24 -

4.3.2.4 LED E (GREEN AND RED) - 24 -

4.3.3 ALARM MESSAGES - 25 -

4.4 LOGGER (OPTION) - 25 -

4.4.1 INSTALLING A SD CARD - 26 -

Main Page