Fluke 1750 - Page 4

1750
Operators Manual
ii
Setting Up the Recorder..................................................................................... 38
Setting the Clock ........................................................................................... 40
Probe Detect .................................................................................................. 40
Setting the IP Address ................................................................................... 41
Adding a Measurement Description.............................................................. 41
Configure Nominal Power Values................................................................. 42
Using Phase Swap ......................................................................................... 42
Setting the Volts and Current Ratio............................................................... 43
Assign Recorder Name and Password........................................................... 43
Setting the Snapshot Period - Periodic Waveform Capture Setting .............. 44
Change Display Language and Phase Identifier............................................ 45
Working with Annotations ............................................................................ 45
Using Image or Voice Annotations........................................................... 47
Inserting Image or Voice Annotations ...................................................... 47
Turn off the Recorder ........................................................................................ 48
Cleaning and Maintenance................................................................................. 48
Regulatory Information for Wireless Communication ...................................... 49
Specifications for the System: Recorder and Power Analyze Software ............ 50
General Specifications................................................................................... 50
Input Specifications ....................................................................................... 50
Synchronization and Sampling...................................................................... 50
Voltage and Current Measurements .............................................................. 50
Voltage and Current Measurement Accuracy ............................................... 51
Transient Voltage (Impulse).......................................................................... 51
Dip (Sag) and Swell Measurements .............................................................. 51
Power and PF Measurement.......................................................................... 51
External Interface Specifications................................................................... 52
Environmental and Safety Specifications...................................................... 52