Fluke 196 - Page 106

Fluke 192/196/199
Users Manual
98
Probe Calibration
Manual pulse adjustment and automatic DC adjustment
with probe check.
Generator Output....................................3 Vpp / 500 Hz
square wave
Memory
Number of Scope Memories.......................................10
Each memory can contain two waveforms plus
corresponding setups
Number of Recorder Memories....................................2
Each memory can contain:
• a dual input TrendPlot
(2 x 13500 points per input)
• a dual input Scope Record
(2 x 27500 points per input)
• 100 dual input Scope screens
Mechanical
Size..................... 64 x 169 x 254 mm (2.5 x 6.6 x 10 in)
Weight..................................................1.95 kg (4.3 lbs)
including battery
Optical InterfacePort
Type.......................................RS-232, optically isolated
To Printer...........................supports Epson FX, LQ, and
HP Deskjet
®
, Laserjet
®
, and Postscript
• Serial via PM9080 (optically isolated RS-232 Adapter/
Cable, optional).
• Parallel via PAC91 (optically isolated Print Adapter
Cable, optional).
To PC/Notebook
• Serial via PM9080 (optically isolated RS-232 Adapter/
Cable, optional), using SW90W (FlukeView
®
software
for Windows 95
®,
98
®
, Me
®
, 2000
®
and NT4
®
).