57
Chapter 6
Using Memory, PC and Printer
About this Chapter
This chapter provides a step-by-step introduction to the
general functions of the test tool that can be used in the
three main modes: Scope, Meter, or Recorder. You will
find information on printer and computer communication
at the end of this chapter.
Saving and Recalling
You can:
• Save screens and setups to memory, and recall
them again from memory. The test tool has 10
screen and setup memories and 2 record and setup
memories.
• Recall screens and recordings to analyze or print the
screen image at a later date.
• Recall a setup to continue a measurement with the
recalled operating configuration.
To Next Page
Loading...
