Fluke 726 User Manual

1
Multifunction Process Calibrator
Introduction
The Fluke 726 Multifunction Process Calibrator (referred
to as “the Calibrator”) is a handheld, battery-operated
instrument that measures and sources electrical and
physical parameters. See Table 1.
In addition to the functions in Table 1, the Calibrator also
has the following features and functions:
• A split-screen display. The upper display allows
users to measure volts, current, and pressure only.
The lower display allows the user to measure and
source volts, current, pressure, resistance
temperature detectors, thermocouples, frequency,
and ohms.
• A thermocouple (TC) input/output terminal and
internal isothermal block with automatic reference-
junction temperature compensation.
• Stores and recalls setups.
• Manual and automatic stepping and ramping.
• Stores and recalls calibration screens.
• Control the Calibrator remotely from a PC running a
terminal emulator program.
Contacting Fluke
To order accessories, receive operating assistance, or
locate the nearest Fluke distributor or Service Center,
call:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
USA Service: 1-888-99-FLUKE (1-888-993-5853)
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit register.fluke.com

Fluke 726 Specifications

General

Auto-ramp function	Yes
Measuring parameters	Current, Frequency, Resistance, Temperature, Voltage
Frequency source accuracy	0.5 %
Frequency measurement accuracy	0.05 %
DC current measurement accuracy	0.01 %
DC voltage measurement accuracy	0.025 %
Resistance measurement accuracy	0.015 %
Product color	Black, Yellow

Weight and Dimensions

Depth	47 mm
Width	96 mm
Height	200 mm
Weight	650 g