729/729FC
Users Manual
14
Table 4. The Display
Number Description Number
Description
A
Step size indicator H
Pressure units indicator
B Setpoint indicator I
External display shows selected device that is
connected. The device can be a pressure module,
temperature probe, process variable (PV) of
connected HART device, or Fluke Connect
secondary device reading.
C
Fluke Connect on indicator (729 FC only) J
Softkey indicator
D
HART on indicator K
Current, voltage, or pressure switch display
E 24 volt loop power active indicator L Main display with measured or sourced value
F
Battery charge level M
Time and date display
G
Pressure port status
To Next Page
Loading...
