Fluke 729 - Page 86

729/729FC
Users Manual
80
Loop Compliance Voltage ....................................................... 24 V dc @ 20 mA
mA Simulate External Voltage Requirement ........................... 12 V dc to 30 V dc
Temperature Measurement Only/100 Ω Pt(385) RTD ............ -50 °C to +150 °C (-58 °F to +302 °F)
Temperature Resolution ......................................................... 0.01 °C (0.01 °F)
Temperature Accuracy ........................................................... ±0.1 °C (0.2 °F) ±0.25 °C (±0.45 °F) combined uncertainty
when using 720 RTD probe (optional accessory)
Drive Capability....................................................................... 1200 Ω without HART resistor, 950 Ω with internal HART
resistor