Fluke 96000 Series - Page 174

96000 Series
Users Manual
A-4
Table A-4. Spurious Signal Content Test
Frequency Spurious Level Limit
2.150 003 GHz < -66 dBc
2.275 003 GHz < -66 dBc
2.425 003 GHz < -66 dBc
2.500 003 GHz < -66 dBc
2.650 003 GHz < -66 dBc
2.825 003 GHz < -66 dBc
2.999 997 GHz < -66 dBc
3.149 997 GHz < -66 dBc
3.424 997 GHz < -66 dBc
3.499 997 GHz < -66 dBc
3.649 997 GHz < -66 dBc
3.774 997 GHz < -66 dBc
3.924 997 GHz < -66 dBc
3.999 997 GHz < -66 dBc
Phase Noise (96040A and 96270A, Optional)
Use a signal source analyzer to make the measurements shown in Table A-5.
Table A-5. Phase Noise Test
Output Offset Actual Specification Uncertainty Limit
125 MHz
100 Hz < -121 dBc/Hz
1 kHz < -141 dBc/Hz
10 kHz < -148 dBc/Hz
100 kHz < -151 dBc/Hz
1 MHz < -153 dBc/Hz
10 MHz < -155 dBc/Hz
1 GHz
100 Hz < -104 dBc/Hz
1 kHz < -130 dBc/Hz
10 kHz < -140 dBc/Hz
100 kHz < -141 dBc/Hz
1 MHz < -148 dBc/Hz
10 MHz < -152 dBc/Hz