BT521
Users Manual
2-4
Set Auto Power Off Time
The Product has an auto power off function to save power. It enables or disables auto
power off. It also allows users to set the time between last operation and auto power off.
To set the time for auto-power off:
1. Push to open the Setup menu.
2. Use L and to highlight General and push the Select softkey.
3. Use L and to highlight Power off, and push the Select softkey.
4. Use L and to highlight 5 Minutes, 15 Minutes, 30 Minutes, or Never.
5. Push the Confirm softkey.
6. Push the Back softkey to return to the Setup screen.
View Device Information
The Product provides the following device information: model number, serial number,
version, analog board version, and calibration date.
To view the device information:
1. Push to open the Setup menu.
2. Use L and to highlight General, and push the Select softkey.
3. Use L and to highlight Device info., and push View softkey.
The Device info… screen shows.
4. Push the Back softkey to return to the Setup screen.
Reset to Factory Mode
To reset the Product to factory mode:
1. Push to open the Setup menu.
2. Use L and to highlight General, and push the Select softkey.
3. Use L and to highlight Factory mode, and push the Reset softkey.
4. Push the Confirm softkey to reset the Product to factory mode.
Note
If the Product is reset to factory mode, all current measurement data
will be lost.
View Memory Usage Information
To view memory usage information:
1. Push to open the Setup menu.
2. Use L and to highlight Memory info., and push the Select softkey.
The screen shows the memory usage information in Meter mode and Sequence
mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
