Fluke BT521 User Manual

Use the Product
Use a Profile in Sequence Mode 3
3-3
Use a Profile in Sequence Mode
In Sequence mode, the Product lets you manage, categorize, and analyze data by
profiles. The figure below shows a typical profile.
hpo006.jpg
Manage Profiles
Each Product stores up to 100 profiles. A profile describes the battery maintenance
environment in a tree view.
For example:
• Site Name: Fluke
• Device name: ABC 500kVA
• Device ID: 1
• Battery series: 1
The PC software uses the same structure to categorize the profile.
It is recommended that you always use the same profile name for one battery string for
better analysis. The profiles are distinguished by their timestamps.
Create a Profile
The Product provides these options to create a profile:
• Create by default: Uses system default data to create each profile.
• String+1: Copies data from the previous profile and increases 1 to the value of
Battery string.
To create a profile in Sequence mode:
1. On the measurement screen of Sequence mode, push the Profile softkey.
The Profile info menu shows on the screen.
2. Push the New softkey. The Select the Way to Create menu shows on the screen.

Fluke BT521 Specifications

General

Certification	RoHS, IEC 61326
Product color	Black, Yellow
Frequency range	50 - 60 Hz
Maximum measured voltage	600 V
Minimum measured voltage	6 V
International Protection (IP) code	IP40
Operating temperature (T-T)	0 - 40 °C
Display type	LCD
Built-in display	Yes
Battery voltage	7.4 V

Weight and Dimensions

Depth	58 mm
Width	103 mm
Height	220 mm
Weight	850 g