Fluke BT521 User Manual

BT521
Users Manual
7-4
Replace the Fuse
Warning
To prevent possible electrical shock, fire, or personal injury:
• Use only specified replacement fuses.
• Replace a blown fuse with exact replacement only for
continued protection against arc flash.
To replace the fuse:
1. Make sure the Product is off and any test leads are disconnected.
2. Install the new fuse.
3. Use a screwdriver to loosen the captive screw on the fuse cover at the upper end of
the Product.
4. Install the new fuse.
5. Reinstall the fuse cover.
6. Tighten the fuse cover screw.
See Figure 7-2.
1
2
hpo006.eps
Figure 7-2. Replace the Fuse

Fluke BT521 Specifications

General

Certification	RoHS, IEC 61326
Product color	Black, Yellow
Frequency range	50 - 60 Hz
Maximum measured voltage	600 V
Minimum measured voltage	6 V
International Protection (IP) code	IP40
Operating temperature (T-T)	0 - 40 °C
Display type	LCD
Built-in display	Yes
Battery voltage	7.4 V

Weight and Dimensions

Depth	58 mm
Width	103 mm
Height	220 mm
Weight	850 g