Fluke BT521 User Manual

Replace the Probe Tips 4
4-5
Replace the Probe Tips
Figure 4-3 shows how to replace the probe tips.
 Warning
To prevent possible electrical shock, fire, or personal injury,
use correct tip covers (CAT II or CAT III) in different CAT
environments.
hsz026.eps
Figure 4-3. Replace the Probe Tips
Use the Attachable Torch
The handle is provided with an attachable torch accessary for illumination. The torch
accessory uses two changeable 3-volt watch batteries and has a battery life of 10 hours.
Figure 4-4 shows how to attach the torch to the probe and how to turn on or turn off the
torch.
2
1
hsz025.eps
Figure 4-4. Attachable Torch

Fluke BT521 Specifications

General

Certification	RoHS, IEC 61326
Product color	Black, Yellow
Frequency range	50 - 60 Hz
Maximum measured voltage	600 V
Minimum measured voltage	6 V
International Protection (IP) code	IP40
Operating temperature (T-T)	0 - 40 °C
Display type	LCD
Built-in display	Yes
Battery voltage	7.4 V

Weight and Dimensions

Depth	58 mm
Width	103 mm
Height	220 mm
Weight	850 g