Fluke db PRUFTECHNIK SHAFTALIGN touch - Opening an Asset Measurement Assigned to an RFID Tag

As soon as data has been written on the RFIDtag, the corresponding hint appears on the dis-
play.
Tap to exit the screen.
Note
If however, data had already been assigned to the RFIDtag, a hint requesting over-
writing of the data appears.
Opening an asset measurement assigned to an RFIDtag
From the home screen, tap the "RFID" icon.
Position the rugged device such that its built-in NFCantenna is as close to the RFID tag as pos-
sible (less than a centimeter).
SHAFTALIGNtouch 27
On-board help