Certifying Fiber Optic Cabling
Autotest in Smart Remote Mode
7-19
7
Figure 7-8. Equipment for Testing in Smart Remote Mode (Method B)
amd46f.eps
A
Tester and smart remote with fiber modules and
connector adapters installed. Match connector adapters
to the connectors in the link.
B
Memory card (optional)
C
Two ac adapters with line cords (optional)
D
Duplex reference test cords. Match the fiber to be
tested. Long ends must have SC connectors. For the
other connectors, match the connectors in the link.
E
Two mandrels. Recommended when testing multimode
fiber with DTX-MFM2 modules. See page 7-11.
F
Fiber cleaning supplies
To Next Page
Loading...
