Fluke DTX-GFM2 - 12 Memory Functions; Storage Locations and Capacities; Checking the Memory Status

12-1
Chapter 12
Memory Functions
Storage Locations and Capacities
All DTX Series testers can store up to 250 Cat 6 Autotest
results, including graphical data, in internal memory.
The maximum capacity of internal memory depends on the
space taken by the tester’s software.
The DTX-1800 and DTX-1200 can store up to 500 Cat 6
Autotest results, including graphical data, on a 16 MB
removable memory card.
The DTX-1800 and DTX-1200 testers can use Multi Media
Card (MMC) or Secure Digital memory cards (SD).
Checking the Memory Status
To check the memory status, turn the rotary switch to
SPECIAL FUNCTIONS, use D to highlight Memory
Status; then press
H.
Or, press
L Memory from the main Autotest screen.
Figure 12-1 describes the memory status screen.