Fluke DTX-GFM2 - Uploading Results to a PC

DTX Series CableAnalyzer
Technical Reference Handbook
12-10
Uploading Results to a PC
To upload results to a PC:
1 Install the latest version of LinkWare software on your
PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
included or the DTX serial cable available from Fluke
Networks.
or
Insert the memory card containing results into the PC’s
memory card reader.
4 Start LinkWare software on the PC.
Click Import on the LinkWare toolbar. Select the
tester’s model from the list.
or
Select Memory card or folder on PC.
5 Select the records you want to import; then click OK.
See the LinkWare online help for details on creating reports
with LinkWare.