Fluke DTX-GFM2 - Loopback Mode Autotest Results

DTX Series CableAnalyzer
Technical Reference Handbook
7-32
Loopback Mode Autotest Results
The Summary screen appears when the test is finished.
To see more detailed results, use D to highlight a
measurement; then press
H.
Figure 7-15 describes the Summary screen and loss results
screen for a single-directional Autotest in Loopback mode.
For bi-directional results in Loopback mode, see
“Bi-Directional Testing” on page 6-42.
amd27f.eps
Figure 7-15. Loopback Mode Summary and Loss Result Screens (single-directional)
1
3
7
4
5
6
8
2