Getting Acquainted
Safety Information
1-7
1
• The permanent link interface adapters may not
perform properly or may be damaged if they are
handled improperly. See page 1-18 for important
handling information.
• Turn off the tester before attaching or removing
modules.
• Leave the module bay covers in place when the
fiber modules are not installed. See page 1-10.
• Never remove the memory card while the
memory card’s LED is on. Doing so can corrupt the
data on the card.
W
*
Warning: Class 1 and Class
2 Laser Products
To avoid possible eye damage caused by
hazardous radiation, when using the fiber
modules follow the safety guidelines given in
Chapter 7 of this manual.
To Next Page
Loading...
