Focus Microwaves ituner - 4.4.12 TuneVSWR command; 4.4.13 TuneVSWR? command

iTuner Manual
33
Remarks:
Phase parameter is optional. If omitted, tuner only adjusts vertical axis to achieve
desired magnitude.
Tuneto? does not move the carriage of the tuner.
Examples:
Tuneto? .5 90
Returns the x and y position of the probe required to
achieve the given gamma. The probe is not moved to this
position.
4.4.12 TuneVSWR command
TuneVswr is similar to TuneTo command, but uses VSWR value instead of magnitude as
parameter. Probe is moved to new position.
Syntax:
TUNEVSWR vswr [phase]
Parameter:
Vswr
Phase
Remarks:
See TuneTo command above
Examples:
TuneVswr 5 10
4.4.13 TuneVSWR? command
TuneVswr? is similar to TuneTo? command, but uses VSWR value instead of magnitude as
parameter. Probe is not moved to new position
Syntax:
TUNEVSWR? vswr [phase]
Parameter:
Vswr
Phase
Return value:
horizontal and vertical position of the probe for the specified goal
Remarks:
See TuneTo? command above
Examples:
4.4.14 TunePM command
Call TunePM to set the pre-match section of the PMT
Syntax:
TUNEPM mag phase