Focus Microwaves ituner - 4.4.17 CALPOINT command

iTuner Manual
34
Parameter:
Mag
Phase
Magnitude
Phase
Return value:
Remarks:
The TunePM command allows to set the pre-match section of a PMT to a specific
reflection coefficient
Examples:
TUNEPM .8 180
4.4.15 TuneH1 command
Call TuneH1 to set the phase of the first harmonic section of a PHT
Syntax:
TUNEH1 phase
Parameter:
Phase
Return value:
Remarks:
Examples:
4.4.16 TuneH2 command
Call TuneH2 to set the phase of the second harmonic section of a PHT
Syntax:
TUNEH2 phase
Parameter:
Phase
Return value:
Remarks:
Examples:
4.4.17 CALPOINT command
Call CalPoint to tune to specified calibration point. The probe is moved to the new position.
Syntax:
CALPOINT nbr