Colorsofthe indicator lamp:
R
Blue: stationaryventilation has been
switched on.
R
Red: thestationaryheater has been switched
on.
R
Yellow: thedeparturetime has been pre-
selected.
The stationaryheater or ventilation switches off
afteramaximumof50minutes.
Switching heater booster modeonand off
#
Switch on theignition.
#
To switchon: press the & button.
#
To switchoff: press the & button.
Heater boostermode willbeswitched on at
an outsidetemperatureofless than 32 °F
(0 °C) when necessary.
%
Heater booster mode is available onlyfor
vehicles withhot-water auxiliary heaters.
Adjustingthe hot-water auxiliaryheaterwith
the on-boardcomputer
Requirements:
R
The fuel tank is filled above thereserve fuel
level.
R
The ignition is switched on.
On-boardcomputer:
4
Settings
5
Heating
Setting theswitch-on time
#
Select Settings.
#
Selectthe desired departuretime.
Activatingthe departuretime
#
Activatethe departuretime by ticking the
box.
%
Ensurethat A, Band Ceachcorrespond to a
programmed departuretime.
%
The programmed time remains setonlyuntil
thenexttime theengine is started.
Selecting programmed time
#
Setthe required programmed timeA,BorC.
%
The required programmed time A, BorCwill
appearonly if thebox to activatethe depar‐
turetime is ticked.
#
Select therequired programmed time by
swiping leftorright, e.g. A, BorC.
104
Climatecontrol
To Next Page
Loading...
