R
The distance to thevehicle in front is too
small, and thereforethe lane markings cannot
be detected.
R
The lane markings changequickly, e.g. lanes
branchoff,cross one another or merge.
R
The roadway is very narrowand winding.
Activating/deactivatingLaneKeeping Assist
and ActiveLaneKeeping Assist
On-boardcomputer:
4
Settings
5
DriveAssist
#
Dependingonvehicle equipment, select Akt.
Spurhalte-Assistent (ActiveLane Keeping
Assist) or Spurhalte-Assistent (Lane Keeping
Assist).
The driving system is activated or deactiva‐
ted, depending on its previous status.
Work mode
ADR(workingspeed control)
Function of ADR (working speed control)
When activated, ADRautomaticallyincreases the
engine speed to apresetspeed or aspeed you
have set.
%
Afteracold start, theidle speed of the
engine is increased automatically. If thepre‐
setworking speed is lowerthan the
increased idle speed,the working speed is
onlyreached once theengine has completed
thewarm-up phase.
It is only possible to activateADR withthe
vehicle stationaryand theparking brake
applied.
On vehicles withautomatic transmission, the
selector levermustbeinposition j.
Activating/deactivatingADR
#
To activate: while theengine is running,
press switch 1.
The Working Speed GovernorActive message
appearsinthe multifunction display.
#
To deactivate: while theengine is running,
press switch 2.
ADR goesout automatically in thefollowing situa‐
tions:
R
Yourelease theparking brake.
R
Youdepress thebrake pedal.
R
The vehicle moves.
R
The control unit detects amalfunction.
AdjustingADR
#
Engagepowertake-off or activate ADR.
#
To increase: press switch 1.
#
To reduce: press switch 2.
Traileroperation
Notesontrailer operation
&
WARNING Risk of accident‑ and injuryif
theload is exceeded
If youexceed thepermitted load when using
therack, theracksystemmay disconnect
from thevehicle and endanger other road
users.
#
Alwayscomplywiththe permitted load
when using therack.
Driving and parking
159
To Next Page
Loading...
