freightliner Sprinter - Partition Sliding Door

Opening theright rear-end door
#
Pullhandle 1.
#
Swing therear-end door to theside until it
engages.
Opening theleftrear-enddoor
#
Makesurethat theright rear-enddoor is
open and engaged.
#
Pull release handle 1 in thedirection of the
arrow.
#
Swing therear-end door to theside until it
engages.
Opening therear-enddoorsfully
#
Open therelevant rear-enddoor out pastthe
firstdetent (90°).
#
Open therear-end door fully.
The rear-enddoor will stay in thestopposi‐
tion.
Closing therear-enddoorsfromoutside
#
Close theleftrear-end door firmly from out‐
side.
#
Closethe right rear-enddoor firmly from out‐
side.
Opening/closingthe rear-end doorsfromthe
inside
The % symbol indicates that therear-end door
is unlocked.
#
To unlock: slidelatch 2 to theleft.
The % symbol is visible.
#
To open: pull opening lever 1 up and open
therear-end door.
#
Swing therear-end door to theside until it
engages.
#
To close: makesurethat theleftrear-end
door is closed.
#
Pull theright rear-enddoor firmly closed by
thedoor handle.
#
To lock: slide latch 2 to theright
The & symbol is visible.
Partition sliding door
Opening and closing thepartition slidingdoor
from thedriver's compartment
&
WARNING Risk of becoming trapped due
to non-engaged partition sliding door
If theopen partition sliding door is not
engaged, it can move on its ownwhile the
vehicle is in motion.
Opening and closing
53