freightliner Sprinter - Display Messages and Warning and Indicator Lamps 259; Display Messages

Displaymessages
Introduction
Function of displaymessages
The displaymessages appear on themultifunc‐
tion display.
The displaymessages withgraphic displays can
be displayedinsimplified format in theOpera‐
tor's Manualand maydeviatefromthe displayon
themultifunction display. The multifunction dis‐
playshows high-priority displaymessages in red.
In addition, awarning tone sounds forspecific
displaymessages.
Actinaccordance with thedisplaymessages and
complywiththe additional instructions in this
Operator's Manual.
In addition,symbols areshown forsome display
messages:
¤
Further information
O
Hide displaymessages
Youcan use theleft-hand TouchControl to select
between thesymbols by swiping to theleftor
right. Pressing ¤ displays further information
on themultifunction display. Pressing O hides
thedisplaymessage.
Youcan hide low-priority displaymessages by
pressing the ¤ button or withthe left-hand
TouchControl. The display messages aresaved in
themessagememory.
Rectify thecause of adisplaymessageasquickly
as possible.
Youcannothide high-priority display messages.
The multifunction displaywillshowthese display
messages until their causes have been rectified.
Calling up saveddisplay messages
On-board computer:
4
Service
5
1Message
If thereare no displaymessages, No Messages
appearsonthe multifunction display.
#
Browsethrough thedisplaymessages by
swiping upwards or downwardsonleft-hand
TouchControl.
#
Exiting themessagememory: press the
% button.
Displaymessages and warning and indicator lamps
259