*
NOTE Damage or malfunctionscaused by
moisture
Moisturemay cause damage to theelectrical
system or cause it to malfunction.
#
When thefuse boxisopen, makesure
that no moisturecan enter thefuse box.
#
When closing thefuse box, makesure
that theseal of thelid is positioned cor‐
rectly on thefuse box.
If thenew fuse whichhas been insertedalso
blows,have thecause traced and rectified at a
qualified specialistworkshop.
Makesureofthe following beforereplacing a
fuse:
R
thevehicle is secured suchthat it does not
roll away
R
all electrical consumers areswitched off
R
theignition is switched off
The fuses arelocated in various fuse boxes:
R
fuse boxinthe front-passenger footwell
(/ page209)
R
fuse boxinthe seat base of thedriver's seat
(/ page209)
Opening thefusebox in theseat base of the
driver's seat
#
To open: press down and unclip fasteners 1
on thecover.
#
Remove thecover.
#
To close: press thecover firmly into theseat
base until fasteners 1 clip in.
Opening and closing thefusebox in theco-
driver's footwell
Opening thefusebox
#
Unlocking and removing thestowage com‐
partment coverinthe co-driver's footwell
(/ page210).
Example:vehicle tool kit insert
#
Liftthe insertatmarkedpositions 1.
#
Pull theinsertout of clips 2.
Closing thefusebox
#
Slide theinsertintoclips 2.
#
Close theinsertbypressing on markedposi‐
tions 1.
#
Put on thestowage compartment coverinthe
co-driver's footwell and lockit(/page210).
Vehicletool kit
Information on thevehicle tool kit
The vehicle tool kit is located in thestowage com‐
partment in thefootwell on thefront-passenger
side (/ page210).
Thevehicle tool kit contains:
R
atowing eye
R
ascrewdriver withTorx, Phillips and slotted
bits
The vehicle tool kit mayalso contain thefollow‐
ing, forexample:
R
an open-endwrench
R
awheel wrench
Breakdownassistance
209
To Next Page
Loading...
