Folding theco-driverbench seat cushionfor‐
wardsand backwards
#
To fold theseat cushion forwards: liftthe
seat cushion out of front anchorage 1.
#
Pull theseat cushion out of rear anchorage
2 and move it slightly forwards.
#
Fold therear edgeofthe seat cushion
upwards.
%
Youcan stow individual objectsinthe stow‐
agespacebeneaththe co-driver benchseat.
#
To fold theseat cushion backwards: fold
therear edgeofthe seat cushion downwards.
#
Slide theseat cushion under theseat back‐
rest intorear anchorage 2.
#
Push thefront seat cushion downwardsuntil
it engages in front anchorage 1.
Adjustingarmrests
Exampleimage
#
To setthe armrestinclination: fold thearm‐
rest morethan 45° upwards 2.
The armrestwill be unlocked.
#
Fold thearmrest forwards 3 as farasitwill
go.
#
Slowly fold thearmrest upwards intothe
required position.
#
To fold thearmrest upwards: if necessary,
fold thearmrest morethan 90° upwards 1.
Folding thefolding seat up or down
&
WARNING Risk of injury when using the
folding seat due to insertedkey
When thekey is in thelockofthe partition
sliding door,itcan come intocontact withthe
person on thefolding seat.
#
Alwaysremove thekey from theparti‐
tion sliding door beforeaperson sits on
thefolding seat.
#
Remove key 1 from thepartition sliding
door.
#
Press thepush button on catch 2 and fold
seat cushion 3 up or down.
#
Release push button on catch 2 when seat
cushion 3 reaches its end position.
#
Move seat cushion 3 until it has locked. The
push button on catch 2 mustbecompletely
flush withthe seat frame.
68
Seats and stowage
To Next Page
Loading...
