3
3.2.10 Wire Sensors
31
3.2.10.1 ‘No wire Signal’ message
31
3.2.10.2 ‘Move from wire’ message
32
3.2.11 Docking Station/Zone
33
3.2.11.1 Robomower does not leave the Docking Station for operation at the time
set in the Weekly Program
33
3.2.11.2 Robomower does not detect the Docking Station contacts and/or ‘Front
wheel problem’ is displayed when the mower is in the Docking Station
33
3.2.11.3 Robomower reached the Docking Station when its contacts are above the
Docking Station contacts
33
3.2.11.4 Robomower is operated in the zone with the Docking Station but stopped
with ‘Recharge battery’ or ‘time completed’ message
33
3.2.11.5 Robomower is searching for the dock in zone with out Docking Station
33
3.2.11.6 Robomower does not complete the edge in plot with Docking Station
33
3.2.12 General
36
3.2.12.1 Excessive noise
36
6
To Next Page
Loading...
