Friendly Robotics robomower RL800 - Page 72

3
3.2.3 Mowing Problems (con.)
3.2.3.5
3.2.3.6
Y
ES
NO
Are the
mowin
g
motors
working in
Auto mode?
Confirm the user performs the right
sequence:
 Step 1 – Press and hold down ‘C’
 Step 2 – then press and hold
down ‘Mow’ – blades will start
working
 Step 3 – then release ‘C’. Maintain
pressure on the ‘Mow’ button
while manually mowing
Poor mulching
T
he followin
g
reasons
decrease mulching quality:
 Mowing deck is full with
grass clippings and debris
 Blunt blades
 Wet grass
 High grass
Refer to flowchart 3.3
(previous page)
To ensure hi
g
h mulchin
g
quality confirm the following:
 The mower is operated regularly
– at least once a week and twice
in high growth periods
 Sharp blades
 Dry grass
Confirm the ‘C’ and the
‘
Mow’ buttons in the
manual controller are
responsive (Choose
‘
Buttons’ under the
‘
Safety test’ menu) and
replace the manual
controller if it found
faulty.
Cannot start
mowing motors
in manual mode
17