Fritsch ANALYSETTE 3 - Safety Information and Use; Requirements for the User

2 Safety informaon and use
2.1
Requirements for the user
This operang manual is intended for persons assigned with operang
and monitoring the Fritsch the ANALYSETTE 3. The operang manual and
especially its safety instrucons are to be observed by all persons
working on or with this device. In addion, the applicable rules and regu-
laons for accident prevenon at the installaon site are to be observed.
Always keep the operang manual at the installaon site of the the ANA-
LYSETTE 3.
People with health problems or under the inuence of medicaon,
drugs, alcohol or exhauson must not operate this device.
The the ANALYSETTE 3 may only be operated by authorised persons and
serviced or repaired by trained specialists. All commissioning, mainte-
nance and repair work may only be carried out by technically qualied
personnel. Qualied personnel are persons who, because of their educa-
on, experience and training as well as their knowledge of relevant
standards, regulaons, accident prevenon guidelines and operang
condions, are authorised by those responsible for the safety of the
machine to carry out the required work and are able to recognize and
avoid possible hazards as dened for skilled workers in IEC 364.
In order to prevent hazards to users, follow the instrucons in this
manual.
Malfuncons that impair the safety of persons, the the ANALYSETTE 3 or
other material property must be reced immediately. The following
informaon serves both the personal safety of operang personnel as
well as the safety of the products described and any devices connected
to them: All maintenance and repair work may only be performed by
technically qualied personnel.
This operang manual is not a complete technical descripon. Only the
details required for operaon and maintaining usability are described.
Fritsch has prepared and reviewed this operang manual with the
greatest care. However, no guarantee is made for its completeness or
accuracy.
Subject to technical modicaons.
2.2 Scope of applicaon
The "ANALYSETTE 3 PRO" is a vercal vibrang laboratory sieve shaker
used for the exact separaon and classicaon of grain fracons. Dry
bulk solids as well as parcle collecves in suspensions can be analysed.
Depending on feed quanty and grain size, the test sieves and sieve pans
can be clamped with dierent diameters and heights.
Safety informaon and use
- 9 -