Fritsch ANALYSETTE 3 - Hazards and Symbols

This amplitude control takes place at regular intervals during the enre
operaon. This makes it possible to react to changes in the sieve system.
The amplitude of the ANAL
YSETTE 3 SPARTAN is set manually with the
Plus and Minus key on the control panel and viewed on the lid.
2.3 Obligaons of the operator
Before using the the ANALYSETTE 3, this manual is to be carefully read
and understood. The use of the the ANALYSETTE 3 requires technical
knowledge; only commercial use is permied.
The operang personnel must be familiar with the content of the oper-
ang manual. For this reason, it is very important that these persons
actually receive the present operang manual. Ensure that the operang
manual is always near the device.
The the ANALYSETTE 3 may exclusively be used within the scope of appli-
caons set down in this manual and within the framework of guidelines
put forth in this manual. In case of non-compliance or improper use, the
customer assumes full liability for the funconal capability of the ANALY-
SETTE 3 and for any damage or injury arising from failure to full this
obligaon.
By using the the ANALYSETTE 3 the customer agrees with this and recog-
nizes that defects, malfuncons or errors cannot be completely excluded.
To prevent risk of damage to persons or property or of other direct or
indirect damage, resulng from this or other causes, the customer must
implement sucient and comprehensive safety measures for working
with the the ANALYSETTE 3.
Neither compliance with this manual nor the condions and methods
used during installaon, operaon, use and maintenance of the the ANA-
LYSETTE 3 can be monitored by Fritsch GmbH. Improper execuon of the
installaon can result in property damage and thus endanger persons.
Therefore, we assume absolutely no responsibility or liability for loss,
damage or costs that result from errors at installaon, improper opera-
on or improper use or improper maintenance or are in any way con-
nected to these.
The applicable accident prevenon guidelines must be complied with.
Generally applicable legal and other obligatory regulaons regarding
environmental protecon must be observed.
2.4 Informaon on hazards and symbols used in this manual
Safety informaon in this manual is designated by symbols. Safety infor-
maon is introduced by keywords that express the extent of the hazard.
Safety informaon
Safety informaon and use
- 11 -