Fritsch ANALYSETTE 3 - Protective Equipment

WARNING!
The ma
ximum accepted concentraon (MAC) levels of
the relevant safety guidelines must be observed; if nec-
essary, venlaon must be provided or the machine
must be operated under an extractor hood.
DANGER!
Explosion haz
ard!
– When Sieving oxidizable substances, e.g. metals or
coal, there is a risk of spontaneous combuson
(dust explosion) if the share of ne parcles
exceeds a certain percentage. When Sieving these
kinds of substances, special safety measures must
be taken and the work must be supervised from a
specialist.
– The high-speed rotor mill is not explosion pro-
tected and is not designed to sieve explosive mate-
rials.
n Do not r
emove the informaon signs.
NOTICE!
Immediately replace damaged or illegible informaon
signs.
n Unauthorised alteraon of the the ANALYSETTE 3 will void Fritsch's
declaraon of conformity to European direcves and void the guar-
an
tee.
n Only use the the ANALYSETTE 3 when it is in proper working order, as
intended and in a safety- and hazard-conscious manner adhering to
the operang manual. In parcular, immediately
recfy any malfunc-
ons that could pose a safety hazard.
n If,
aer reading the operang manual, there are sll quesons or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protecve equipment
Protecve equipment is to be used as intended and may
not be disabled or remo
ved.
All protecve equipment is to be regularly checked for
integrity and proper funconing.
Safety informaon and use
- 15 -